A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-1722001.png)
Suspension Control Module: Service and Repair
Electronic Damping Control Module
Electronic Damping Control Module
Removing
The electronic damping control module (J250) is located behind the left luggage compartment side trim.
-
Switch off all electrical consumers.
-
Remove ignition key.
-
Remove cover from right luggage compartment storage compartment.
-
Release and remove connector - 3 -.
-
Press clips - 2 - to the side and remove electronic damping control module - 1 -.
Installing
Installation is reverse order of removal, with special attention to the following:
-
Reprogram electronic damping control module (J250) => [ Control Position, Programing with VAS 5051B ] See: Suspension/Suspension Control
( Automatic - Electronic )/Testing and Inspection.
