A5 Quattro Coupe V6-3.2L (CALA) (2009)
Front Subframe: Service and Repair
Subframe
Subframe
Special tools, testers and auxiliary items required
‹› Engine support bridge (10-222 A)
‹› Engine support supplement set (T40093)
‹› Engine/transmission jack (V.A.G 1383 A)
‹› Wheel hub support (T10149)
‹› Tensioning strap (T10038)
Removing
-
Remove wheels.
-
Remove left and right wheel housing liner.
-
Remove noise insulation.
-
Remove crossbrace => [ Subframe Crossbrace ] See: Subframe Crossbrace.
-
Remove stabilizer bar => [ Stabilizer Bar ] See: Stabilizer Bar/Service and Repair/Front Suspension/Stabilizer Bar.
-
Remove vehicle level sensor, if applicable => [ Level Control System Sensor ] See: Sensors and Switches - Suspension/Suspension Control
Pressure Sensor/Switch/Service and Repair/Front Suspension/Level Control System Sensor.
-
Secure left and right wheel housing liner using a tensioning strap (T10038) as shown in the illustration.
-
Remove left and right control arm => [ Track Control Arm ] See: Control Arm/Service and Repair/Front Suspension/Track Control Arm.