A5 Quattro Coupe V6-3.2L (CALA) (2009)
-
Start the engine with the selector lever in the "P" position.
-
While pressing the brake pedal and with the vehicle at idle, shift through all selector lever positions ("P", "R", " N", "D" and "S") leaving each
position engaged for at least 10 seconds.
-
Place selector lever in position "N".
-
Increase engine speed to 2000 rpm and maintain for at least 60 seconds.
-
Place selector lever in position "P".
-
Run engine at idle.
-
Place Used Oil Collection and Extraction Device (V.A.G 1782) under transmission.
CAUTION!
Danger of eye injury.
‹› Wear protective goggles!
-
When ATF temperature of 35 °C is reached, remove ATF inspection plug - arrow B - and drain off any excess ATF.