A5 Quattro Coupe V6-3.2L (CALA) (2009)
Shift Cable: Adjustments
Selector Lever Cable, Adjusting
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
‹› Socket and key (T40031)
Procedure
‹› Tightening specification. Refer to => [ Selector Lever Cable Assembly Overview ] See: Service and Repair/Removal and Replacement/Selector
Lever Cable Assembly Overview.
-
Carefully pry the side of the selector lever boot retaining frame - 1 - out of the center console - arrows - using the trim removal wedge (3409) and
fold it upward.
-
Place selector lever in position "D".
-
Through opening - arrow - in shift mechanism, loosen bolt on selector lever cable approximately one turn using Socket (T40031).