A5 Quattro Coupe V6-3.2L (CALA) (2009)
‹› For securing the selector lever handle to the selector lever
‹› Removing and installing, refer to => [ Selector Lever Handle and Transmission Range Display Unit Assembly Overview ] See: Lamps and
Indicators - A/T/Shift Indicator/Service and Repair/Selector Lever Handle and Transmission Range Display Unit Assembly Overview
5
Selector Lever Transmission Range (TR) Position Display (Y26)
‹› Refer to => [ Transmission Range Position Display ] See: Lamps and Indicators - A/T/Shift Indicator/Service and Repair/Transmission Range
Position Display
6
Nut
‹› 10 Nm
‹› Quantity: 4
‹› For securing shift mechanism to the body
7
Rubber seal
8
Selector Lever Sensor System Control Module (J587) with Tiptronic Switch (F189)
‹› Refer to => [ Selector Lever Sensor Control Module with Tiptronic Switch ] See: Relays and Modules - A/T/Shift Interlock Control
Module/Service and Repair
9
Selector mechanism function unit
‹› Can only be replaced as complete unit
‹› Refer to => [ Selector Mechanism Function Unit ] See: Selector Mechanism Function Unit
10
Shift lock solenoid (N110)
‹› Refer to => [ Shift Lock Solenoid ] See: Actuators and Solenoids - A/T/Shift Interlock Solenoid/Service and Repair
11
Transmission Park Selector Switch (F305)
‹› Consists of two microswitches on the circuit board on the shift lock solenoid (N110)
‹› Can only be replaced together with Shift Lock Solenoid (N110), refer to => [ Shift Lock Solenoid ] See: Actuators and Solenoids - A/T/Shift
Interlock Solenoid/Service and Repair
12
Noise Insulation
‹› Not installed on all vehicles
13
Lock washers
‹› Quantity: 4
‹› Replace
‹› For securing the noise insulation on the selector mechanism function unit
14
Retaining clip
‹› Secures selector lever cable on selector mechanism function unit
15
O-ring
‹› Replace
16
Selector lever cable
‹› Do not bend or kink