A5 Quattro Coupe V6-3.2L (CALA) (2009)
‹› Release bearing, checking => [ Checking the Release Bearing through 02.08 ]
‹› Remove the old grease in the guide sleeve bearing surface - arrow B -.
‹› Lubricate the guide sleeve bearing surface - arrows B - with solid lubricant (G 000 150).
Swash plate clutch release bearing from 03.08
‹› Inner diameter - arrow B -: 36 mm
‹› Swash plate clutch release bearing, checking => [ Swash Plate Clutch Release Bearing, from 03.08,
Checking ]
‹› If present, remove the old grease in the guide sleeve bearing surface - arrow B -.
5
Clutch release lever
‹› Different versions
‹› Remove the old grease from the release lever.
‹› Lubricate the release lever bearing surface - arrow C - with solid lubricant (G 000 150).
6
Bolt
‹› 8 Nm
‹› Different bolt lengths
‹› Quantity: 2
‹› Insert with locking fluid (AMV 185 101 A1)
7
Securing plate
‹› For guide sleeve
‹› Deleted from 02.08
8
Guide sleeve
‹› Different versions
Guide sleeve through 02.08
‹› Diameter - arrow D -: 34 mm
‹› Remove the old grease from the guide sleeve.
‹› Lubricate the release lever bearing surface - arrow D - with solid lubricant (G 000 150).
Guide sleeve from 03.08
‹› For the swash plate clutch release bearing => [ Swash Plate Clutch Release Bearing, from 03.08,
Checking ]
‹› Diameter - arrow D -: 36 mm
‹› If present, remove any grease on the guide sleeve
9
Clutch slave cylinder
‹› Removing and installing => [ Clutch Slave Cylinder ] See: Clutch Hydraulic System/Clutch Slave Cylinder/Service and Repair.
‹› Do not operate clutch pedal after removal