A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-1255003.png)
-
Before loosening drive pinion nut, measure friction torque.
-
Note this value.
CAUTION!
If, during the repair, the flange/driveshaft must be replaced, then this measured must be adjusted once again, refer to => [
Flange/Driveshaft and Seal with Rear Final Drive Removed ].
-
Mark the position of the drive pinion nut to the drive pinion - arrow -.
Determining dimensions - a - and dimension - b -
