A5 Quattro Coupe V6-3.2L (CALA) (2009)
‹› Distance of flange to drive pinion = dimension - a -
‹› Distance of flange to drive pinion nut = dimension - b -
-
Take note of the determined dimensions.
-
Secure the counterhold tool (3028) to the flange/driveshaft with the bolts - A -.
-
Secure the adapter (T10235) in the threaded hole below the flange/driveshaft.
-
Loosen the drive pinion nut. The counterhold tool (3028) must be supported on the adapter (T10235) - arrow -.
-
Count the number of turns when removing the drive pinion nut and write it down.
- A - 3 bolts M 8 x 25
- B - 32 mm socket