A5 Quattro Coupe V6-3.2L (CALA) (2009)
/Page-1255013.png)
-
Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128 A1).
-
Drive in new shaft seal as far as stop without tilting it.
-
Warm the flange/driveshaft to approximately 80 ? C using an inductive heater (VAS 6414)
-
Install the new flange/driveshaft.
-
Coat the threads on the new nut with locking fluid (AMV 185 101 A1).
-
Secure the counterhold tool (3028) to the flange/driveshaft with the bolts - A -.
