A5 Quattro Coupe V6-3.2L (CALA) (2009)
Constant Velocity Joint: Overhaul
Front Suspension
Peened Triple Roller Joint
Special tools, testers and auxiliary items required
‹› Thrust plate (VW 401)
‹› Thrust plate (VW 402)
‹› Punch (VW 408 A)
‹› Punch (VW 411)
‹› Tube (VW 416 B)
‹› Thrust pad (VW 447 H)
‹› Hose clamp pliers (V.A.G 1275)
‹› Torque wrench (V.A.G 1331)
‹› Torque wrench (V.A.G 1332)
‹› CV joint boot clamp tool (V.A.G 1682)
‹› Assembly tool (T10065)
‹› Slide hammer - complete set (VW 771)
‹› Assembly/removal Tool (T40018) for triple roller joint AAR 3300 i
‹› Assembly device (T40084) for triple roller joint AAR 2600 i
‹› Brass or copper drift
Triple Roller Joint AAR 2600 i or 3300 i, Disassembling
-
Clamp axle shaft horizontally in vise.
‹› Use protective vise covers.
‹› Ensure drive axle is not damaged.
-
Mark location of joint to axle shaft
If they are not marked and are not reinstalled in their previously installed positions, noises may occur later during driving operation.
A waterproof felt pen is well-suited for marking.
-
Open clamps - arrows -.