A5 Quattro Coupe V6-3.2L (CALA) (2009)
Version with Base
-
Position protective joint boot between - arrows -.
-
Slide circlip - 1 - over splines.
‹› The circlip - 1 - must engage the groove.
Depending on drive axle version, (T10065/3) must be used instead of assembly device (T10065/2).
Tripod Roller Star, Pressing Onto Axle Shaft
The chamfer on star faces toward axle shaft, this is used as an assembly aid.
-
Before installing joint or triple roller star, splines - A - must be lightly coated with grease used in joint.