A5 Quattro Coupe V6-3.2L (CALA) (2009)
Shifter M/T: Service and Repair
Shift Knob and Boot
Shift Knob and Boot
‹› Shift knob is removed together with shift lever boot.
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
‹› Hose clamp pliers (V.A.G 1275)
Removing
-
Raise the shift lever boot using the trim removal wedge (3409) - arrows - and remove it upward.
-
Fold the shift lever boot up and over the shift knob.
-
Open the clamp - arrow - and remove the shift knob with the shift lever boot.
Installing
Installation is performed in the reverse order of removal.
-
Secure the clamp - arrow - using the hose clamp pliers (V.A.G 1275).