A5 Quattro Coupe V6-3.2L (CALA) (2009)
Front Door Window Glass: Adjustments
Door Window, Adjusting Height
Door Window, Adjusting Height
‹› Adjustment dimensions. Refer to => [ Door Window Gap Dimensions ].
A - Possible adjustment - Door bottom, rear
‹› For positioning the upper edge of the door window on the seal in the rear roof area
‹› Accessible through the holes on the bottom edge of the door. The door trim does not need to be removed.
- 1 - Window regulator
- 2 - Adjusting screw
-
To adjust the height, turn the adjusting screw - 2 - using a 4 mm hex socket wrench
‹› 1 turn = 1 mm adjustment
- 3 - Door window
B - Possible adjustment - door bottom, front
‹› For positioning the upper edge of the door window on the seal in the front roof area
‹› Accessible through the holes on the bottom edge of the door. The door trim does not need to be removed.