A6 V6-3.0L (AVK) (2004)
^
Insert subframe and thread hex bolts -5- and -6- partially.
^
Start hex bolt for suspension strut to track control link
^
Guide bearing and guide links into subframe.
^
Put bolts in outside holes (arrows).
Before tightening subframe, It must be fixed to body using special tool 3393.
^
Holes -1- and -2- of subframe and hole -3- of aluminum bracket must line up on both sides.
Note: Fixing subframe in this way is a substitute for a subsequent axle alignment only when:
^
Only if subframe, has been removed and reinstalled.
^
Holes 4- and -2- line up before repair.