A6 V6-3.0L (AVK) (2004)
-
Remove screws - 3 - (2x).
-
Remove upper C-pillar trim - 1 - downward.
-
Installing
-
Slide upper C-pillar trim panel - 1 - upward.
-
Install screws - 3 - with washers - 2 -.
-
Rest of installation is reverse order of removal
-
After assembling trim, make sure seal is properly fitted
2
-
Washers (2x)
-
Tightening torque: 3.5 Nm