A6 V6-3.0L (AVK) (2004)
2
-
Torx(R) bolts
-
10 Nm (7 ft lb)
3
-
Bolt w/washer assembly
-
50 Nm (37 ft lb)
4
-
Bolt w/washer assembly
-
50 Nm (37 ft lb)
5
-
Bolt w/washer assembly
-
50 Nm (37 ft lb)
-
For service position: remove bolt and install 3369 support tool
NOTE: After installing the lock carrier, check the headlight settings and adjust if necessary.
Fig. 1 Inserting 3369 support tool
-
Screw in 3369 support tool on left and right as shown.
-
Pull lock carrier forward until rear hole in lock carrier aligns with front threaded hole in fender flange.