A6 V6-3.0L (AVK) (2004)
Seat Back: Service and Repair
Right (2/3) Section of Backrest
Right (2/3) Section Of Backrest, Removing And Installing
Removing
-
Fold both backrest sections forward.
-
Unclip trim -3- from rear in direction of arrow; if necessary, pry out from rear through hole.
-
Remove bolt-1 and take off clamp -2-.
-
Bolt -1- tightening torque: 10 Nm (7 ft lb)
-
Lift backrest -1- out of center support bracket -2-, arrow -A- and pull off fitting -3-, arrow -B-.
-
Unplug connectors for heated backrest.