A6 V6-3.0L (AVK) (2004)
-
Set VAS5161/8 installation cartridge into VAS5161/13 guide sleeve or VAS5161/14.
-
Press down pressure fork and pull knurled bolt upward while turning left and right -the valve keepers are inserted in this manner.
-
Release pressure fork with the knurled bolt still pulled.
-
Insert valve lifters.
-
Camshafts, installing, Refer to Camshaft, Engine, Service and Repair.
Notes:
^
After installing camshafts, do not start engine for at least 30 minutes. The hydraulic valve lifters have to settle (otherwise valves will strike the
pistons).
^
After working on the valvetrain, carefully rotate engine by hand at least 2 full revolutions to ensure that valves do not strike the pistons when
starting.