audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 4777 > < With Manufacturer's Scan Tool|Page 4775
Page 3
background image

If the pressure does not drop, the following DTCs are possible:

-

Union between pressure gauge and fuel supply line leaking

-

Supply line leaking at fuel tank

-

Non-return valve in fuel pump leaking

NOTE:  When the shut off valve is closed the pressure gauge shows the pressure after the isolating valve "intake manifold end" (direction of injectors,
fuel pressure regulator). If the pressure before the isolating valve (tank direction) should now fall, the equipment cannot recognize this.

If the pressure drops again, the following DTCs are possible:

-

Fuel pressure regulator faulty

-

Injectors leaking

-

Unions on pressure gauge after cut-off valve leaking

NOTE:  When disconnecting the pressure gauge, close the shut-off valve, unscrew the union on adapter VAG1318/15, then open the shut-off valve to
drain off excess fuel into a suitable container.

With Manufacturer's Scan Tool|Page 4777 > < With Manufacturer's Scan Tool|Page 4775