A6 V6-3.0L (AVK) (2004)
Fuel Gauge Sender: Locations
AWD
Fuel Supply System - All Wheel Drive (AWD)
NOTE:
-
Secure all hose connections using hose clamps appropriate for the model type:
-
VAG1921 hose clip pliers are recommended for installing spring-type clamps.
-
Always replace seals and gaskets.
Fuel Tank With Attachments - Component Overview
Component Locations, Overview
1
Bolt M8 x 28 with permanent washer
-
Tighten to 23 Nm
2
Mounting clip
-
For heat shield
-
Check for secure fitting
3
Heat shield
-
for fuel tank
4
Carrier plate
5
Tension strap
-
Note installed position
6
Fuel return line
-
From engine
-
Mark before removing
-
Note direction of arrow on connector flange
-
Clipped in on fuel tank, at front right
7
Vent line
-
Front end