audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ATF Level, Checking and Topping Up|Page 3532 > < ATF Level, Checking and Topping Up|Page 3530
Page 4
background image

^

Always replace gasket for ATF plug.

^

Tighten ATF plug to 80 Nm (59 ft. lbs.).

^

Press --> button at V.A.G 1551 Scan Tool.

^

Enter "06" for function "End output' and confirm entry by pressing "Q" button.

ATF, changing or adding after repair.
Special tools and equipment

^

Drip tray VAG 1306

^

ATF filling device VAG 1924

^

Engine not running.

^

Hang up container of ATF filling device VAG 1924 on vehicle as high as possible. 

^

Lift vehicle.

Note:  
^

Observe correct disposal of old ATF. 

^

Do not start engine without ATF. The vehicle must also not be towed unless there is ATF in the transmission. 

^

Place drip tray VAG 1306 under transmission.

ATF Level, Checking and Topping Up|Page 3532 > < ATF Level, Checking and Topping Up|Page 3530