audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ATF Level, In Planetary Gearing, Checking and Correcting|Page 3548 > < ATF Level, In Planetary Gearing, Checking and Correcting|Page 3546
Page 2
background image

Remove ATF drain plug -1-
Drain ATF.
Drain plug with sealing ring must be replaced
Tighten new drain plug -1- to 40 Nm

Filling transmission with ATF

CAUTION!

Transmission must be filled exactly according to instructions.

Remove ATF inspection plug -2-

Guide filler hook of ATF filler tool VAG 1924 into an opening -arrow- of protective cap, do not push cap up and in while doing so.
Add ATF using ATF filler tool VAG 1924 until ATF exits from check hole.
Place selector lever in position "P" .
Start engine and allow it to run at idle approx. 20 minutes.
Stop engine.
Fill ATF again with ATF filler tool VAG 1924 until ATF escapes from inspection hole.

ATF Level, In Planetary Gearing, Checking and Correcting|Page 3548 > < ATF Level, In Planetary Gearing, Checking and Correcting|Page 3546