A6 V6-3.0L (AVK) (2004)
Electronic Throttle Control Module: Testing and Inspection
With Manufacturer's Scan Tool
Angle Sensor For Throttle Valve Actuator, Checking
Special tools and equipment
-
VAG 1526A
-
VAG 1594A
-
VAG 1598/31
-
VAS5051 with VAS5051/1
The angle sensor -1- for throttle drive (power accelerator activation) -G187- and angle sensor -2- for throttle drive (power accelerator activation) -G188-
signal the position of the throttle valve to the engine control module. Both angle sensors are located in the throttle valve control module.
Test sequence
-
Connect testing and information system VAS5051 and select vehicle system "01 - Engine electronics". Ignition must be switched on. See: Testing
and Inspection/Scan Tool Testing and Procedures/Scan Tool Testing/With Manufacturer's Scan Tool/Scan Tool Connecting and Initial
Checks/Connecting VAS 5051 Scan Tool
Display on VAS5051: