A6 V6-3.0L (AVK) (2004)
Harness connector
Measure to
Terminal
1
Engine Ground (GND)
-
Switch ignition on.
-
Specified value: approx. battery voltage
-
Switch ignition off.
If specified value is not obtained:
-
Pull off rubber seal of plenum chamber cover in direction of arrow.
-
Remove cover -1- toward front.
-
Remove cover for E-box, plenum chamber (arrows).
-
Pry off Engine Control Module (ECM) retaining bracket (arrow) using a screwdriver and set control module aside.