A6 V6-3.0L (AVK) (2004)
/Page-699001.png)
Wheel Speed Sensor: Service and Repair
Rear ABS Wheel Speed Sensor Rotor (AWD), Removing and Installing
ABS wheel speed sensor, removing and installing
Removing
-
Switch off ignition.
-
Lift rear bench seat out of locking mechanism.
-
Disconnect ABS wheel speed sensor harness connectors and push out grommet (arrow).
-
Raise vehicle.
-
Pull ABS wheel speed sensor out of wheel bearing housing.
-
Disconnect ABS wheel speed sensor wiring from retainers.
-
Remove ABS wheel speed sensor wiring downward together with grommet.
When installing pay particular attention to the following points:
-
Replace clamping sleeve.
-
Connect ABS wheel speed sensor wiring and snap grommets in retainers.
