A6 V6-3.0L (AVK) (2004)
Fuel Gauge Sender: Locations
AWD
Fuel Pump (FP) And Sender For Fuel Gauge - Component Overview
Part I
Component Locations, Overview
1
Fuel line
-
From union piece to suction jet pump in baffle housing lower part
-
Component of baffle housing
-
not individually replaceable
-
Connect to union piece -item 3-
2
Baffle housing lower part
-
With suction jet pump
3
Union piece
-
Clipped in on baffle housing with catches
-
To remove, press toward left so that catches disengage and lift upward
-
Insert fuel line into baffle housing when installing
4
Electrical wire
-
from sender 1 for fuel gauge to sender 2
-
for fuel gauge
-
Secured with 2 cable ties -item 6- at suction jet pump lines
5
Sender for fuel gauge -G-
-
Clipped in at baffle housing in fuel tank
6
Cable ties
-
Fuel resistant
7
Locking ring
-
Use ring nut spanner 3087 to remove and install
-
Tighten to 120 Nm