A6 V6-3.0L (AVK) (2004)
^
Mount linkage for headlight vertical aim control
^
Screw on backing plate, and tighten to 10 Nm.
^
Mount brake disc, screw on brake caliper, and tighten to 190 Nm (M 14 x 1.5 x 38).
^
Mount wheel and tighten to 120 Nm.
^
Tighten hex bolt for drive axle
Suspension adjustment at front axle must be checked on an alignment stand recommended by VW/Audi, and corrected, if necessary.