A6 V6-3.0L (AVK) (2004)
^
Remove nut-1-.
^
Pry out clip -2-.
^
Remove cover.
Note: Shown without wheel bearing housing and strut for the sake of illustration.
Work outline only valid for 2.7 BiTurbo
^
Lower subframe at rear.
Work outline,
^
Removing left exhaust pipe
^
Remove shielding panel.
Work outline is valid for all vehicles
^
Place pan underneath vehicle to collect hydraulic fluid.
^
Unbolt banjo bolt for return hose (22 mm wrench) from steering gear.