A6 V6-3.0L (AVK) (2004)
Suspension Strut / Shock Absorber: Service and Repair
Shock Absorbers/Springs (Front Wheel Drive), Removing and Installing
Shock absorbers/springs (front wheel drive), removing and installing
Special tools and equipment
^
VAG1383 A engine/transmission jack with universal transmission holder VAG1359/2
Removing
^
Carefully open and remove air connections -4-.
Note: To remove and install spring cylinder, use engine/transmission Jack VAG1383 A with holder 1359/2.
^
Remove bolt -2- on left and lower engine/transmission jack.
^
Unscrew bolt -1- and remove shock absorber.
^
Pull down rear axle, by second mechanic if necessary, and remove shock absorber.
Installing
Installation is reverse of removal.
^
Replace all bolts and nuts.
^
Insert shock absorber in body and tighten to 45 Nm.