audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)|Page 13160 > < Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)|Page 13158
Page 2
background image

^

3- Kukko 15-17 extractor

^

VAG 1383 A Engine/transmission jack

Removing

^

Remove hubcap, for light-alloy wheels pull off center cap (use pulling hook in vehicle tools).

^

Unscrew hex bolt for drive axle. (Only loosen when vehicle is standing on its wheels: danger of accident).

^

Remove wheel.

^

Secure brake disc using a wheel bolt.

^

Unscrew hex bolt -2-.

^

Pull cable of ABS wheel speed sensor out of bracket on wheel bearing housing.

^

Unscrew bolts -1- from brake caliper and remove brake caliper.

^

Re-attach brake line holder. Screw in and tighten hex bolt -2-.

^

Attach brake caliper to body so that its weight cannot bend or damage brake line.

^

Unscrew bolt-1- for ABS wheel speed sensor.

Note:  

Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)|Page 13160 > < Front Wheel Bearing, Pressing Out and In (Wheel Bearing Housing Removed)|Page 13158