A6 V6-3.0L (AVK) (2004)
/Page-5035004.png)
2. Bearing inner ring
3. Bell E-40
4. Hollow piston cylinder H KZ-1 5
5. Special nut E-8-214 and be bolt
Pressing in wheel bearing
Installation position: Large inside diameter of wheel bearing faces out.
^
Put wheel bearing -1-, pressure piece -2- (put collar into bearing), and hollow piston cylinder -3- with tie bolt on wheel bearing housing.
^
Attach pressure piece -4- with angles toward wheel bearing housing and special nut -5- from inside.
^
Press in wheel bearing by actuating pump.
1. wheel bearing
2. Pressure piece E-45 for wheel bearing with diameter 75 mm or pressure piece E- 14-1 for wheel bearing with diameter 82 mm
3. Hollow piston cylinder H KZ-1 5
4. Pressure piece E-43
5. Special nut E-8-214 and be bolt
Pressing In wheel hub
^
Put wheel hub -1- and hollow piston cylinder -2- with be bolt onto wheel bearing.
^
Attach pressure piece -3- with collar to special nut -4- from inside.
^
Press in wheel hub by actuating pump.
1. wheel hub
2. Hollow piston cylinder H KZ-1 5
3. Pressure piece E-5
4. Special nut E-8-214 and be bolt
Rest of installation is reverse of removal.
