A6 V6-3.0L (AVK) (2004)
Shift Interlock Solenoid: Service and Repair
5 Speed Automatic 01V
5 Speed Automatic 01V
Shift Lock Solenoid Switch, removing and installing
Removing
-
Remove shift mechanism.
-
Remove stop buffer from cable lever.
-
Shift to Tiptronic position and remove frame.
-
Move selector lever to "2".
-
Disengage lever for lock cable by lifting it from its mounting and remove from mounting bracket.
-
Press out bolt for locking pawl using drift.
-
Remove shift lock solenoid switch together with locking pawl upward.
Installing
-
Move selector lever to "2".
-
Install shift lock solenoid switch together with locking pawl from above into mounting bracket.
-
Carefully drive in bolt for locking pawl.
-
Check engagement of locking pawl in "P" and "N" of selector lever using a screwdriver.
-
Insert locking pawl into mounting bracket and lock it by feel in both mountings.
-
Check locking function of locking pawl: Locking pawl must engage in shift lever position "P" and must lock the selector lever.
-
Install frame on mounting bracket (ribbed side must face up) and install stop buffer in cable lever.
-
Install shift mechanism.