A6 V6-3.0L (AVK) (2004)
^
Tighten bolts (arrows) by hand and then tighten to final torque.
Note: When first tightening bolts by hand, make sure the housing gap between intermediate flange for front final drive and transmission housing
decreases evenly at circumference.
^
Install transfer case.
^
Change ATF and top off after repair work.
Tightening torques
Securing bob for intermediate flange for front final drive at transmission housing ..................................................................................................... 23 Nm
Securing bolts for transfer case via intermediate flange for front final drive at transmission housing ........................................................................ 23 Nm