A6 V6-3.0L (AVK) (2004)
Transmission Mode Switch: Service and Repair
Tiptronic Switch -F189, A/T 01V
Removing:
-
Remove center console and extension.
-
Remove handle for selector lever see Fig. 7.
-
Carefully disengage 4 clips -arrows- and remove cover upward.
Note: If clips are damaged or broken, replace the applicable components.
-
Lift out printed circuit board with small screwdriver over 3 clips-arrows-.
-
Remove printed circuit board with integrated Tiptronic Switch.
Note: If the printed circuit board is glued into the cover, replace the complete cover with printed circuit board.
Installing:
-
Insert printed circuit board with integrated Tiptronic Switch into cover of shift mechanism.
-
By carefully pressing on the printed circuit board it must snap into the cover.