A6 V6-3.0L (AVK) (2004)
/Page-3338003.png)
^
Press mounting bracket with ball bearing onto left drive flange.
When pressing, set drive flange onto VW401 thrust plate. Press on mounting bracket with VW412 thrust plate, VW415 tube and 32-109 driving
sleeve.
^
Insert circlip (arrow -A-).
^
Install left drive flange.
^
Check and top off transmission fluid in rear final drive of automatic transmission.
Tightening torques
Heat shield to transmission .......................................................................................................................................................................................... 23 Nm
Mounting bracket for left drive flange at transmission ................................................................................................................................................ 23 Nm
