A6 V6-3.0L (AVK) (2004)
Shift Cable: Diagrams
CVT 01J
Selector lever cable and interlock cable, exploded view
Notes:
^
Do not bend or kink the selector lever cable.
^
Before installing, lubricate the cable eye and ball socket with a thin coating of polycarbamide grease, part no. G 052 142 A2.
1. 23 Nm
2. Selector lever cable
-
do not bend or kink, lightly grease cable eyelet and ball socket before installing
-
if rubber boots are damaged the selector lever cable must be replaced
-
do not install rubber boot transmission side turned wrong way
3. Lock nuts 12 Nm
4. Sleeve
-
For selector lever cable
-
Insert in bottom section of shift mechanism cover
5. Clip
6. Ignition/starter - switch
-
With ignition key removal lock
7. Interlock cable
-
For ignition key removal lock
-
Must not be kinked