A6 V6-3.0L (AVK) (2004)
Shifter CVT: Service and Repair
01J CVT
Removing
-
Push shaft piece -1- downward up to stop.
-
Pull button -2- from selector lever handle up to catch point (dimension "a") and pull handle upward.
-
Dimension a = 3 mm
Installing
-
Remove button -2- on dimension "a" carefully from selector lever handle -3-.
-
At the same time insert handle -3- with button -2- in driving direction onto selector lever until stop.
-
Turn handle -3-, so that button -2- faces the driver. When doing this, the handle slides into a vertical groove of the selector lever.
-
Connect handle -3- completely on to selector lever. It must then engage in a ring groove.
-
Press button -2- into handle of selector lever -3
-
Pull shaft piece -1- upward until it engages on handle for selector lever.