A6 V6-3.0L (AVK) (2004)
^
Clean groove for sealing ring.
^
Insert sealing ring into groove -1-
For the sake of illustration, individual parts are shown removed.
1. Snap ring
2. Cover from repair kit
3. Sealing ring
4. Triple roller joint
^
Insert drive axle in vise.
^
Lightly press on cover -1- from repair kit so that securing ring from repair kit can be inserted.
^
Insert securing ring from repair kit below entire circumference of engaging groove.
Note: Make sure securing ring engages audibly.
^
Position joint piece in center. Position see min - max position