A6 V6-3.0L (AVK) (2004)
-
Measure and note the following measurements using depth gauge for check during assembly.
-
Measurement a = distance of flange/drive pinion
-
Measurement b = distance of flange/drive pinion nut
Note: The following procedure in the illustration is shown with differential removed.
-
Install 3028 retainer and remove drive pinion nut.
-
Place drip tray underneath.
-
Pull off flange using VW391 puller.
-
Thread two hex head bolts M8 x 30 -A- into flange.