A6 V6-3.0L (AVK) (2004)
^
Install valve body.
^
Top up ATF.
For transmissions with hydraulic control E1 812
Removing
^
Remove valve body.
^
Unscrew Transmission Input Speed Sensor -A- from transmission.
Installing
^
Bolt Transmission Input Speed Sensor -A- onto transmission with bolt -B-. The tightening torque is 9 Nm.
^
Route wire with connector -C- according to illustration so that the wiring is not pinched during installation of the valve body.
^
Install valve body.
^
Fill up ATF.