A6 V6-3.0L (AVK) (2004)
-
Apply adhesive tape - 4 - to side panel to avoid damaging paintwork.
-
Remove trim strip - 1 - at bottom from securing clips - 2 - and pull downward out from roof edging trim.
3
-
Pop rivet
-
Carefully remove roof trim strip - 1 - from securing clips using plastic wedge, starting from bottom.
CAUTION: Do not bend the roof trim strip.
-
Lay cutting cord around side window as shown.
-
Secure ends - x - and - y - in two pull handles from special tool VAG1351.
-
Pull cutting cord in direction of arrow - A - using light sawing action, and cut through adhesive sealing material below at side panel and above at
roof frame.
-
Pull cutting cord downward through adhesive bead in direction of arrow - B -.
-
Remove window from window opening.