audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Rear Shelf (Folding Backrest), Removing and Installing|Page 24484 > < Rear Shelf (Folding Backrest), Removing and Installing|Page 24482
Page 2
background image

-

Remove upper C/D-pillar trim on left and right

For vehicles with flap in parcel shelf:
-

Open flap - 8 - beneath high-mount brake light - 5 - (access via luggage compartment).

For all vehicles:
-

Unclip high-mount brake light - 5 - by unfastening spring - 4 - (access via luggage compartment).

-

On vehicles with electric sun shade, loosen screws in luggage compartment Fig. 1.

-

Pull rear shelf - 1 - forward in direction of arrow and unclip rear shelf - 1 - at clip - 2 - (3x).

-

Unclip trim and guide - 10 - for center three-point seat belt from the rear.

-

On vehicles with electric sun shade, disconnect connector for sun shade.

-

Remove rear shelf - 1 - upward and forward.

Rear Shelf (Folding Backrest), Removing and Installing|Page 24484 > < Rear Shelf (Folding Backrest), Removing and Installing|Page 24482