audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Data Exchange Between Engine/ABS/Transmission Control Module|Page 17039 > < Data Exchange Between Engine/ABS/Transmission Control Module|Page 17037

A6 Quattro Sedan V6-2.7L Turbo (APB) (2000)

Page 4
background image

-

Leave ignition switched on for 10 seconds. Then check DTC memory of the control module that has just been connected, using the scan tool.

-

If the malfunction "Data Bus Powertrain Malfunction" is now indicated, replace the control module which has just been connected.

-

If malfunction "Data Bus Powertrain Malfunction" is not indicated, connect next control module, and repeat above procedure.

Data Exchange Between Engine/ABS/Transmission Control Module|Page 17039 > < Data Exchange Between Engine/ABS/Transmission Control Module|Page 17037