A6 Quattro Sedan V6-2.7L Turbo (APB) (2000)
/Page-3409002.png)
-
Remove brake servo hose -1- at bulkhead.
-
Disconnect ground (GND) wire from exhaust temperature sensor (left side).
-
Remove exhaust temperature sensors from intake manifold (left and right sides).
-
Remove coolant reservoir -arrows- and move it clear to the side.
Note: Leave coolant hoses connected.
-
Disconnect connector from coolant level monitor.
-
Remove cover panel from cylinder head cover (cylinder bank 4-6).
-
Disconnect hose -2-.
