A6 Quattro Sedan V6-2.7L Turbo (APB) (2000)
/Page-95001.png)
Parking Assist Control Module: Service and Repair
Removing
-
Remove the left trunk liner.
-
The control module for the parking aid -2- is mounted to the bracket -1- below the trunk side cover.
-
Should it become necessary to remove the bracket, loosen the three Phillips head screws -3-.
-
Pull off harness connector.
-
Remove the control module for parking aid -1- can be removed by loosening both hex nuts -2- (SW 10).
Installing
-
Install in reverse order of removal.
