A6 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Control Arm Bushing: Service and Repair
Lower Track Control Link Bushings
Lower Track Control Link Bushings, Replacing
Special tools, test equipment and auxiliary items
Note: Always use protective jaw covers when clamping an aluminum link in a vise.
Pulling out inner bushing
Installation position of bushing
The markings on the lower track control link and on the side of the bushing should be parallel.
Pulling in inner bushing
-
Insert bushing -A- 3.2 mm (1/8 inch) into recess of 3346/1 thrust piece.
-
Pull bushing in to stop.
Pulling out outer bushing