A6 Quattro Sedan V6-2.7L Turbo (APB) (2000)
-
Remove second bolt -4-.
-
Remove driver's side storage compartment:
-
Remove clutch pedal from master cylinder. To do this, pry out bolt lock using screwdriver (arrow -1-), remove bolt (arrow -2-) and depress clutch
pedal.
Notes:
^
For the following procedures, make sure that the clutch pedal does not press out switch -1- from securing clip, since the thread of the switch
would be damaged and the switch would have to be replaced.
^
To ensure proper securing, the switch may only be installed once.
-
Remove bolts for master cylinder (arrow -2-) and for mounting bracket (arrow -3-).
-
Pull complete pedal assembly somewhat toward seating compartment and remove clutch master cylinder -4-.
Installing
Installation is the reverse order of removal, while noting the following: