A6 Quattro Sedan V6-2.7L Turbo (APB) (2000)
/Page-6190006.png)
Fig. 8 Determining circlip for large taper roller bearing for drive pinion
-
Determine the thickest circlip that can still just be fitted.
-
Determine circlip from table. Part numbers
The following circlips are available:
-
Fit circlip.
Fig. 9 Pressing off inner race of small taper roller bearing for drive pinion together with 1st speed sliding gear
Note: Do not press off together with 1st and 2nd gear synchro-hub and 2nd speed sliding gear.
