A6 Quattro Sedan V6-2.7L Turbo (APB) (2000)
Transmission Speed Sensor: Service and Repair
Transmission Input Speed Sensor-G182-
5 Speed Automatic 01V
Transmission input speed sensor-G182-, replacing
Note: A distinction is made between two types of transmissions.
-
Transmission with hydraulic control E17, on which the sensor for transmission RPM (inductive sensor) is secured to the underside of the valve
body.
-
Transmission with hydraulic control E1812, on which the sensor for transmission RPM (hall sensor is secured behind the valve body on
transmission housing.
For transmissions with hydraulic control E17
Removing
-
Remove valve body.
-
Turn valve body on its back and disconnect connector at Transmission Input Speed Sensor-1-.
-
Unbolt Transmission Input Speed Sensor-1- at valve body.
Installing
-
Use two spacer sleeves -2- (height: 20 mm) to install Transmission Input Speed Sensor -1- and tighten to 7 Nm.
-
Installation position: Sensor side with connector pins faces valve body center.