A6 Quattro Sedan V6-2.7L Turbo (APB) (2000)
-
Move winding device as shown and attach relay pulley in upper corner of windshield.
-
Route cutting cord as shown.
-
Insert VAG474/11 protective foil between windshield and molded headliner.
-
Cut adhesive up to point where cord no longer runs in relay pulley.
-
Remove relay pulley and continue to cut adhesive.
-
Repeat these steps in top left and bottom left corners of windshield.
-
Cut glass completely free by performing these steps.
-
Remove windshield from windshield opening using double suction cups.